Introduction
The 600W mold laser welding machine is a high-power pulse laser welding equipment for metal mold repair and precision parts remanufacturing. Its core consists of an Nd: YAG laser, a high-speed electric control workbench, an automatic optical protection system, an industrial-grade control computer, a precision cooling system, and a CCD microscopic observation system. It is widely used in the automobile, electronics, medical equipment, aerospace, hardware, and plastic industries, especially suitable for crack repair, corner repair, and structural welding of metal materials such as mold steel, stainless steel, and aluminum alloy.
Advantage
Strong welding penetration
The Mould Laser Welding Machine is equipped with a 600W Nd: YAG laser, which has extremely high energy density output capability, single pulse energy up to 100J, and can achieve penetration welding with a depth of more than 3mm. Compared with traditional low-power equipment, this machine can reduce the number of multiple surfacing, improve welding efficiency by more than 30%, and reduce the risk of deformation caused by heat accumulation.
Dense weld structure
Relying on precise laser beam control technology, the mold laser welding machine achieves rapid melting and cooling during the welding process. The cooling rate of the molten pool reaches 10⁶℃/s, which effectively refines the grain structure, makes the weld organization highly dense, and significantly reduces the defect rate.
Small heat-affected zone
By concentrating the laser energy on a tiny spot with a diameter of 0.2mm, the Mould Laser Welding Machine effectively controls the heat input range. With the short pulse working mode, the heat diffusion is limited to within 0.3mm near the welding point, greatly reducing the risk of thermal deformation of the parent material.
Support for multi-specification workpieces
The mold laser welding equipment is equipped with a high-precision mobile platform with a load-bearing capacity of up to 100kg and supports multi-angle rotation adjustment of the welding head to adapt to welding tasks of workpieces of different sizes and geometric shapes.
High operational safety
The Mould Laser Welding Machine 600W is equipped with an electronic shutter filter system and a CCD observation device. When working, it automatically senses the laser start and quickly cuts off the light path to prevent strong light from damaging the operator's eyesight. The intelligent optical protection system ensures that the equipment guarantees safety during long-term continuous operation and meets the health protection standards in industrial-grade welding environments.
High cooling efficiency
The equipment is equipped with a 5P cold water circulation system to adjust the cooling water temperature in real-time, with a flow rate of up to 33L/min. The entire cooling module continuously provides efficient heat dissipation for the laser and optical path components, effectively extending the life of core components such as the laser cavity and xenon lamp by more than 30%, and improving the continuous operation capability of the mold laser welding machine.
Excellent fatigue resistance
The welded joint forms a uniform and dense structure under the action of high-power laser pulses, and has good stress diffusion and absorption capabilities. Relying on the constant energy control module of the 600W high-energy mold laser welding machine, the weld shows extremely high fatigue life and can withstand more than 10 million repeated load cycles. It is suitable for molds and mechanical parts with high-frequency vibration and demanding structural strength requirements.
This is a video introduction to the Mage open mold laser welder:
specification
FAQ
Q: Is it conceivable to raise the mold laser welding machine's power output above 600W?
A: It is indeed feasible. Still, 600W is already a powerful pick. Our personnel are available to assist you should your power output be more than 600W. We will carefully assess your needs and offer a special answer appropriate for them.
Q: What is the minimum order quantity (MOQ)?
A: We do not have a minimum order quantity.
Q: What does the factory packaging look like?
A: We put the safety of your items first and use sturdy, fully enclosed wooden boxes for packaging, lined with foam cushioning materials to ensure the safe transportation of your welding machine.
Q: Who bears liability for any damage done during shipping?
A: Trade terms determine liability. Ex-factory and FOB costs belong to the customer. We bear full responsibility for CIF and DDU. However, due to the robustness of our packaging, there is minimal likelihood of any damage occurring during transportation. We will work with clients to divide the loss depending on the unqualified packing protection. Though this prospect is somewhat limited. Furthermore, should rough handling or other issues cause damage to the products, we will help minimize losses and therefore protect the interests of our clients.
Q: Do your products include a warranty?
A: Yes, we provide a one-year warranty for our products. After the warranty period, we will only charge the cost of the parts if any damage occurs. Our factory provides users with 24/7 telephone, email, and video connection technical support.
Hot Tags: mould laser welding machine 600w, China mould laser welding machine 600w manufacturers, suppliers, factory, , , qcw laser welder machine 300w