Product Introduction
Fiber transmission laser welding machine 200w is a welding equipment. This welding machine can be used for welding various metal materials such as carbon steel, alloy steel, stainless steel, and can easily realize spot welding, lap welding, tailor welding and continuous welding.
How to Store
Storage Environment
The fiber transmission laser welding machine 200w should be placed in a dry, well-ventilated and temperature-appropriate indoor environment (recommended to maintain between 10 - 35℃).
Optical Component Protection
For the optical lens, optical fiber and other key optical components of the fiber transmission laser welding machine 200w, a special dust cover should be used for tight coverage. The dust cover should be made of soft, non-static material, such as high-quality silk cloth or special optical dust cloth. Before covering, use professional optical cleaners and cleaning tools, such as lens paper, cotton swabs, etc., to gently wipe the surface of the lens to remove dust and stains, and ensure that the surface of the lens is clean and free of impurities. For optical fibers, check whether their connection parts are firm to avoid damage to the optical fiber or unstable signal transmission due to looseness during storage.
Electrical System Maintenance
After cutting off the power supply of the equipment, regularly check whether the electrical connection parts of the fiber transmission laser welding machine 200w are loose. Open the electrical control cabinet of the equipment and check the connection status of each terminal, plug and socket. If looseness is found, tighten it with appropriate tools in time. At the same time, clean the electrical components. You can use a clean soft brush to gently brush off the dust on the surface of the components to avoid problems such as short circuit or poor contact caused by dust accumulation. For some electrical components that are easily affected by moisture, such as capacitors, integrated circuits, etc., desiccant can be used for moisture-proof treatment.
Maintenance Of Mechanical Parts
Regularly apply an appropriate amount of lubricating oil to the mechanical moving parts of the fiber transmission laser welding machine 200w, such as guide rails, screw rods, etc. Choose a special lubricating oil suitable for the mechanical parts of the equipment, such as high-precision guide rail oil or screw rod oil. Before applying, wipe the surface of the guide rail and screw rod with a clean cloth to remove dust and debris, and then apply the lubricating oil evenly on the guide rail and screw rod to ensure that the lubricating oil can fully penetrate the friction surface of the moving parts. At the same time, check whether the fixing screws of the mechanical parts are loose, and tighten them in time if they are loose.
Please see video check welding quality:
FAQ：
Q: What is the machine's highest laser power?
A: Appropriate for fine and exact welding jobs, the machine boasts a maximum laser power of 200W.
Q: Describe the laser wavelength.
A: With a 1064 nm laser wavelength, which is perfect for many different materials, including alloys and metals,
Q: The condenser cavity uses what kind of reflector?
A: The imported ceramic condenser cavity of this model improves efficiency and durability.
Q: What is the range of spot adjustment?
A: The 0.2–2 mm spot adjustment range gives versatility for several welding needs.
Q: What are the ranges of laser frequency and pulse width?
A: The pulse width spans from 0.1 ms to 10 ms; the laser frequency is variable between 1 Hz and 20 Hz.
Q: What does the machine run, a type of cooling system?
A: The machine's 1P cooling system ensures continuous operation over extended running times.
Hot Tags: fiber transmission laser welding machine 200w, China fiber transmission laser welding machine 200w manufacturers, suppliers, factory, laser cleaning machine, , ,